Calibrate the device

Runs a manual calibration for the connected Nureva® audio device. The device will emit a loud static-like sound whose duration varies by device type (e.g. HDL310/410 takes approximately 20 seconds). Ensure the room is quiet when running calibration. We do not recommend calibrating when the device is in a call. For CM1 and CM2, the speaker bars must be connected for the calibration to start. For System Hub, the audio bars and microphone pods (if used) must be connected for the calibration to start.

Minimum role required: general

Language
Credentials
Header
URL
Click Try It! to start a request and see the response here!